Patch Repair Kit

Description

Waterbed Patch Repair Kit

Cut out the patch larger than the damaged area and round the corners. If you do not the corners have a tendency to catch on the mattress pad, sheets, and bedding, etc. causing the patch to pull loose. Clean the damaged area. Apply adhesive to one side of the patch and on the area where the hole is located on the mattress. Wait for a few moments till the glue becomes tacky and hazy colored. At this point immediately place the patch over the damaged area and press out air bubbles.

 

Pinholes and punctures can be sealed without patches by applying a drop of adhesive over the damaged area and allowing it to dry however it is best to use a patch. After all, is dry to apply a bead of glue around the entire perimeter of the patch and let dry completely. This will assure the edges are completely sealed. Finally, one side note if your waterbed bladder were to fail, got punctured, or open on a seam somewhere it is important to think ahead before you fill your mattress back up, be sure to purchase a new safety liner.

 

Not Sure If You The Mattress Can Be Fixed?

When is it OK to Repair my Waterbed Bladder with a Patch Kit?

 

Is Your Waterbed Mattress Beyond Repair?

View our entire selection of New Waterbed Mattresses

 

WARNING: Do not attempt to repair seams. Water leaks coming from corners, bottom seams, and side seams are electronically sealed from the factory seams are not glued. The glue will NOT hold them together. Again seams are not repairable with this repair kit.