Every purchase made online is encrypted with a high level of security you’ve come to expect. Your private information is never shared nor sold, so you can buy with confidence. You can also visit our store if you are in the St. Louis area.
A lot of people have been asking us about the Split Queen Box Spring. One of the main questions that we don’t answer here though is where can someone purchase one? You can purchase a Split Queen Box Spring solution here.
Table of Contents
Yes, mattress manufacturers make split boxsprings and split foundations.
Virtually any mattress store has the availability to or can order the two-piece box spring.
Most mattress retailers will need to order one of these for you. They can take anywhere from a couple of days to a couple of weeks to special order.
Each half of the split queen boxspring or split foundation should measure 30 x 80 for a total width of 60 inches and a total length of 80 inches.
Yes, it’s your boxspring, so you can do what you want with it. The problem is that you could ruin the support unit and would most definitely void any warranty you might have from the mattress company, not only on the boxspring but the matching mattress.
Queen box springs are specially made in two pieces to fit through low clearance stairways, and staircases, and to go around tight turns that a normal one-piece queen box spring could not fit through.
The truth is that the split queen box spring will actually be a little stronger due to the extra wood and steel that is needed to build each piece. Other than the previously mentioned overall it is safe to say that there should be very little difference when comparing a one-piece boxspring vs. a two-piece box spring.
Yes, they do. We recommend contacting the dealer for the specific height of the low-profile split boxspring because this measurement can vary from brand to brand and dealer to dealer.
This can vary between mattress retailers, but it is generally safe to say that $50.00 to $200.00 additional to the cost of a traditional 1-piece queen boxspring is reasonable. This can vary widely due to varied construction between brands.
Absolutely nothing has changed in width and length dimensions therefore you can continue to use your existing bedding.
Yes, you need to make sure that not only the ends of the boxspring are properly supported but the middle is supported as well. This will keep the two halves from falling to the floor.
The purchase of a box spring is something most people overlook. Today we are going to rundown these two different mattress support systems, but the fact is, even in the mattress business this is boring stuff so bear with us. A boxspring is boring. It just sits there like a foundation its other commonly called name and does 2 important jobs. Job one is to be a support system for the mattress. The second task is to elevate the mattress to a comfy height while simultaneously keeping it from falling through the steel bed frame. So what’s the big deal about Split Box Spring vs Regular Box Spring? Is there a difference? Actually, there is and there are a few things you will definitely want to consider before you buy one.
Check Out Our Split Queen Box Spring Solution
Many believe that a hump or ridge develops in the center of the mattress from head to toe due to a split foundation. They also believe that inevitably body impressions or depressions take place on either side of the hump. Not true we actually dedicated an entire article on the subject HERE.
In summation, we don’t believe the only time to buy a split boxspring is if you cannot get it into the room. Superior strength, extra solid support for the mattress, and it a sleeper, and yes the added convenience of the split boxspring vs. a regular one-piece box spring for lightweight easy mobility.
Tell us any creative solutions you might have, that could be substituted in place of a Split Queen Box Spring. We want to know what you are doing to get a good night’s sleep.
Split box springs are just what they sound like box springs with two halves. They’re made in two sections that, when put together, account for the full size of your mattress. The two halves make a split box spring easier to transport. This is especially helpful if you have a queen- or king-sized bed.
Split box springs are built from two separate pieces and are designed to provide support for a full, queen, or king-size mattresses. It’s important to know that split box springs require the use of a platform base or bed frame to ensure the pieces don’t move or separate.
They typically come in two separate sections that easily can be pushed or fused together. It’s often, and almost always, with larger bed sizes; a split queen or and king split. The make of a split model is the exact same make you’d see in a traditional one-piece, this is just an easier way to connect the box itself.
When a Box Spring Isn’t Necessary. Despite the benefits, sometimes using a box spring isn’t worth it. Many bed frames today are designed to go without them and already provide needed support. Whether you choose to use one is up to you, but keep in mind what type of mattress or bed frame you should use in its place.
If you think that stacking one mattress on top of another will provide a sturdy base, it won’t. You’d be better putting the mattress on the floor than one on top of the other. That would at least offer a solid foundation.